Tuesday, October 29, 2019

Time Event  
08:30 - 09:15 Welcome and Coffee  
09:15 - 09:30 Opening (Amphi A) - Franck Plestan  
09:30 - 10:15 Academic Keynote by Johan Meyers (Amphi A) - Johan Meyers  
10:15 - 10:30 Coffee break (Hall A)  
10:30 - 12:00 Rotor/aerodynamics (B 008)  
10:30 - 10:50 › Time domain flutter analysis of wind turbine rotor blades - Jelmer Derk Polman, Leibniz Universität Hannover, Institute for Wind Energy Systems,  
10:50 - 11:10 › Response analysis of rotor-blade systems through a reduced dynamical model - Oscar Sanchez Jimenez, LMN  
11:10 - 11:30 › Synchronisation behaviour of paired VAWT rotors - Greeshma Boohalli Shivamallegowda, Vrije Universiteit [Brussel]  
11:30 - 11:50 › Computation of effective velocity to couple RANS and Vortex Particles Methods through an intermediate lifting line - Pierre Maltey, Laboratoire de Mécanique de Normandie, IFP Energies nouvelles  
10:30 - 12:00 Farm modeling (B 009)  
10:30 - 10:50 › Calibration of onshore wind turbine numerical model using experimental data - Francisco Pimenta, CONSTRUCT - ViBest, Faculty of Engineering of the University of Porto  
10:50 - 11:10 › Experimental analysis of the wake behavior during yaw variation imposed through wind farm control strategies - Stefano Macri, Laboratoire pluridisciplinaire de recherche en ingénierie des systèmes, mécanique et énergétique  
11:10 - 11:30 › Parametrization of a turbine CFD model - Chengyu Wang, Technische Universität München [München]  
11:30 - 11:50 › Extension of an Aeroelastic Actuator Sector Model for wind turbine parametrization in a coupled Large Eddy Simulation framework - Ishaan Sood, Department of Mechanical Engineering [Leuven]  
10:30 - 12:00 New concepts (Amphi A)  
10:30 - 10:50 › Load Calculations for Different Blade Geometry Using Response Surface Methodology - Hazal Altug, Yavrucuk Ilkay, Oguz Uzol  
10:50 - 11:10 › Convolutional Neural Network Architectures for Wind Analysis - Shubhi Harbola, Universität Stuttgart [Stuttgart]  
11:10 - 11:30 › Novel topologies for magnetic gears - Sarah Kelly, University of Strathclyde  
11:30 - 11:50 › Investigation of the capacity factor of wind turbines and weather-routed energy ships when deployed in the far-offshore - Roshamida BINTI ABD JAMIL, Faculty of Science and Defense Technology, National Defence University of Malaysia, LHEEA, Ecole Centrale de Nantes - CNRS  
12:00 - 13:15 Lunch (Hall L)  
13:15 - 14:45 Wind resource, Turbulence & Wake (B 008)  
13:15 - 13:35 › Wake deviation of yawed wind turbine by Large-Eddy Simulation - Félix HOUTIN MONGROLLE, Complexe de recherche interprofessionnel en aerothermochimie  
13:35 - 13:55 › Benefits and optimal design of vertically staggering wind farms - Jessica Strickland, University of Twente  
13:55 - 14:15 › Evaluation of an urban environment regarding the potential placement of wind turbines - Yannick Jooss, Norwegian University of Science and Technology  
14:15 - 14:35 › Characterizing and modelling a “Dunkelflaute” event - Bowen Li, Delft University of Technology  
13:15 - 14:45 New concepts (Amphi A)  
13:15 - 13:35 › A new approach in fatigue analysis for onshore wind turbine - Hao Bai, Lab. of Mechanics of Normandy (LMN)  
13:35 - 13:55 › A method for the optimization of the energy performance of an energy ship - Gaël Clodic, LHEEA Lab  
13:55 - 14:15 › Developement of a Platform for the experimental validation of the Energy Ship Concept - Mohd Najib Abdul Ghani Yolhamid, École Centrale de Nantes, National Defence University of Malaysia [Kuala Lumpur]  
14:15 - 14:35 › Preliminary study of sailing wind turbines for the harvesting of the far-offshore wind energy resource - Raphael ALWAN, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique  
13:15 - 14:45 Social acceptance & Techno-economics (B 009)  
13:15 - 13:35 › Uncertainties in atmospheric sound propagation depending on source height - Jasmin Hörmeyer, Institute of Structural Analysis, Leibniz Universität Hannover  
13:35 - 13:55 › Towards the use of secondary windscreens to improve wind turbine sound measurements - Susanne Martens, Leibniz University Hannover - Institute of Structural Analysis  
13:55 - 14:15 › Hosting capacity of distribution networks for offshore renewables - Sam Harrison, Department of Electronic and Electrical Engineering [University of Strathclyde]  
14:15 - 14:35 › Analyzation and optimization of different wind power infeed combination forecasts - Tamara Schröter, Institute of Electric Power Systems, Otto-von-Guericke University Magdeburg  
14:45 - 15:30 Poster oral presentations (Amphi A)  
15:30 - 16:30 Poster session & coffee break (Hall A)  
16:30 - 17:30 Rotor/aerodynamics (B 009)  
16:30 - 16:50 › Optimization of Aerodynamic Profiles for Wind Turbine Blades by Means of Numerical Simulation with Natural Inflow Turbulence at High Reynolds Numbers - Brandon Arthur Lobo, University of Applied Sciences Kiel  
16:50 - 17:10 › Mini-Gurney Flaps for Aerodynamic Optimizations of HAWT Rotor Blades - Joerg Alber, Technische Universität Berlin, University of Applied Sciences Berlin  
17:10 - 17:30 › Aerodynamics and Aeroacoustics of Vertical Axis Wind Turbine - Livia Brandetti, Delft University of Technology  
16:30 - 17:30 Wind resource, Turbulence & Wake (B 008)  
16:30 - 16:50 › Experimental and numerical study of the planar actuator disc wakes - Ming Huang, Delft University of Technology  
16:50 - 17:10 › Urban DES Windfield Simulations of the University Campus in Tübingen - Maximilian von der Grün, Universität Stuttgart  
17:10 - 17:30 › Characterization of a gust generator for aerodynamic experiments: The Chopper - Ingrid Neunaber, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique  
16:30 - 17:30 Control (Amphi A)  
16:30 - 16:50 › Analysis of grid frequency data to quantify the effect of the provision of synthetic inertia on the mechanical loads of a wind turbine - Arne Gloe, Wind Energy Technology Institute, Flensburg University of Applied Sciences  
16:50 - 17:10 › Frequency Regulation Capability from Wind Turbines Using Virtual Synchronous Machine Control - Liang Lu, Technical University of Denmark  
17:10 - 17:30 › Set-point optimization in wind farms to mitigate effects of flow blockage induced by gravity waves - Luca Lanzilao, Department of Mechanical Engineering [Leuven]  
17:30 - 18:30 Visit of experimental wind energy facilities at Ecole Centrale de Nantes - By groups of 30 persons, 2 experimental facilities will be visited. - Visit of the wave and towing tanks - Atmospheric wind turnnel  

Wednesday, October 30, 2019

Time Event  
09:00 - 09:15 Welcome and coffee (Hall A)  
09:15 - 10:00 EU Funding for young researchers (Amphi A) - CAP EUROPE  
10:00 - 10:45 New concepts (B 008)  
10:00 - 10:20 › Effectiveness of small wind turbines in urban and suburban areas - Larissa Zajicek, BOKU University of Natural Resources and Life Science Vienna  
10:20 - 10:40 › Aerodynamics of Leading-Edge Protection Tapes for Wind Turbine Blades - Desirae Major, Department of Aerospace Engineering, The Pennsylvania State University, State College, PA, 16801, USA  
10:00 - 10:45 Wind resource, Turbulence & Wake (Amphi A)  
10:00 - 10:20 › 360 CFD simulation for small wind turbines to increase annual energy production and reduce maintenance cost - Kai Mommsen, University of applied Science Flensburg  
10:20 - 10:40 › Impact of different turbulent models on floating offshore wind turbine loads and motions - Rieska Mawarni Putri, Universitetet i Stavanger  
10:00 - 10:45 Foundation & Geotechnics (B 009)  
10:00 - 10:20 › Strain estimation for fatigue assessment of an offshore wind turbine using regression and modal expansion algorithms - Maximilian Henkel, Acoustics and vibration Research Group - Vrije Universiteit Brussel  
10:20 - 10:40 › Natural frequencies of a monopile supported offshore wind turbine taking into account soil-foundation-structure interaction and incorporating soil spatial variability - philip alkhoury, University of Nantes, Bd. de l'Université, 44603 Saint-Nazaire Cedex,  
10:45 - 11:00 Coffee break (Hall A)  
11:00 - 12:00 Control (B 008)  
11:00 - 11:20 › Morphing blades for unsteady load alleviation of wind and tidal turbines - Geethanjali Pavar, Department of Electronic and Electrical Engineering [Strathclyde], Institute for Energy Systems [Edinburgh]  
11:20 - 11:40 › Design of Individual Blade Control modified to prevent enhancement of disturbances - Abhishek Thapa, Centre for Doctoral Training in Wind and Marine Energy Systems [Strathclyde]  
11:40 - 12:00 › Novel Implementations of Direct Online Rainflow-counting in Model Predictive Control for Fatigue-Reduction - Stefan Loew, TU Munich, Siemens AG  
11:00 - 12:00 O&M (B 009)  
11:00 - 11:20 › Training data requirements for SCADA based condition monitoring using artificial neural networks - Simon Letzgus, Institute of Software Engineering and Theoretical Computer Science, Technical University of Berlin  
11:20 - 11:40 › Monitoring system for continuous evaluation of bending moments at the tower of an onshore wind turbine: Calibration and evaluation of alternative approaches - João Pacheco, Faculdade de Engenharia [Porto]  
11:40 - 12:00 › An experimental database for wind turbine noise propagation in an outdoor inhomogenous medium - Bill Kayser, Unité Mixte de Recherche en Acoustique Environnementale  
11:00 - 12:00 Floating topics (Amphi A)  
11:00 - 11:20 › Numerical Wave Tank for the Investigation of Floating Wind Turbines Hydrodynamics - Constance Clément, Complexe de recherche interprofessionnel en aérothermochimie, IFP Energies nouvelles, Rond-point de l'échangeur de Solaize, BP 3, 69360 Solaize, France  
11:20 - 11:40 › Cost reduction of floating wind turbine substructure by tuned liquid damper assisted robust control - Wei Yu, University of Stuttgart  
11:40 - 12:00 › A parameter study of the metacentric height role and limitations in minimizing the trim of the DTU 10-MW wind turbine mounted on moored spar-buoy floater - Ghaith Esber, Rostock University  
12:00 - 13:15 Lunch (Hall L)  
13:15 - 14:35 Reliability (B 009)  
13:15 - 13:35 › Numerical Modelling of Impact Damage in Composite Structures - Mirac Onur Bozkurt, METU Center for Wind Energy, Middle East Technical University, Ankara  
13:35 - 13:55 › A study on the progressive damage development in a wind turbine blade aeroshell during virtual full-scale structural test - Can Muyan, METUWIND - METU Center for Wind Energy  
13:55 - 14:15 › Mathematical Methods for Site Specific Remaining Life Prediction of Wind Turbines - shadan mozafari, DTU Wind Energy  
14:15 - 14:35 › On the Use of Nonlinear Normal Modes for Model Reduction - Thomas Simpson, Institute of Structural Engineering [ETH Zürich]  
13:15 - 14:15 Control (B 008)  
13:15 - 13:35 › Improved yaw control using wind farm information - Brian Jenkins, University of Strathclyde  
13:35 - 13:55 › Independent Nacelle Control for Floating Wind Turbines - Iain Struthers, University of Edinburgh  
13:55 - 14:15 › Optimising Wind Farm Power Output to Deliver the Maximum Requested Power under Future Grid Constraints - Jenny Morris, Department of Electronic and Electrical Engineering [University of Strathclyde]  
13:15 - 14:15 Rotor/aerodynamics (Amphi A)  
13:15 - 13:35 › 3D aerodynamic shape optimization of wind turbine rotors - Antariksh Dicholkar, Danmarks Tekniske Universitet  
13:35 - 13:55 › Numerical analysis of the effects of Gurney Flaps on vertical-axis wind turbines performance - Pier Francesco Melani, University of Florence  
13:55 - 14:15 › Beam models for the analysis of curved, twisted and tapered wind turbine blades undergoing large displacements - Giovanni Migliaccio, University of Pisa  
14:45 - 16:15 Meet the industry (Amphi A)  
16:15 - 16:45 Coffee break & networking (Hall A)  
16:45 - 17:30 Low-Order Modeling, Controller Design and Optimization of Floating Offshore Wind Turbines (Amphi A) - Frank Lemmer, Winner of the eawe excellent young wind doctor award 2019  
16:45 - 17:30 Addressing turbulence in experimental wind energy research (B 009) - Ingrid Neunaber  
19:30 - 22:00 Banquet at O'Deck restaurant  

Thursday, October 31, 2019

Time Event  
09:00 - 09:15 Welcome and coffee (Hall A)  
09:15 - 10:15 Rotor/aerodynamics (B 008)  
09:15 - 09:35 › Rotor load optimization with a multi fidelity surrogate model - Kenneth Loenbaek, DTU Wind Energy/Suzlon Energy  
09:35 - 09:55 › Implementation of a pressure based solver in SU2 for wind energy applications - Akshay Koodly Ravishankara, Energy Research Centre of the Netherlands, University of Twente [Netherlands]  
09:55 - 10:15 › Recent Advances in Lattice-Boltzmann-based Large-eddy Simulations of Wind Turbines - Henrik Asmuth, Uppsala Universitet  
09:15 - 10:15 Reliability (B 009)  
09:15 - 09:35 › Sensitivity of load application methods used for wind turbine blade design - Wilson Javier Veloz Parra, Normandie Univ, INSA Rouen Normandie, LMN, Rouen, France  
09:35 - 09:55 › Well-founded meta modeling of wind turbines - Franziska Müller, Institute of Structural Analysis, Leibniz Universität Hannover  
09:55 - 10:15 › Electromechanical interactions in wind turbines of high nominal power - Fiona Dominique Lüdecke, University of Stuttgart, Stuttgart Wind Energy (SWE), Allmandring 5b, 70569 Stuttgart  
09:15 - 10:15 Floating topics (Amphi A)  
09:15 - 09:35 › Experimental Characterisation of the Far Wake of a Floating Offshore Wind Turbine in Idealised Conditions - Benyamin Schliffke, École Centrale de Nantes (ECN)  
09:35 - 09:55 › Experimental testing methodologies for floating offshore wind turbines - Alessandro Fontanella, Politecnico di Milano, Department of Mechanical Engineering - Federico Taruffi, Politecnico di Milano, Department of Mechanical Engineering - Simone Di Carlo, Politecnico di Milano, Department of Mechanical Engineering  
09:55 - 10:15 › State of the Art of Floating Wind Energy - Aldert Otter, University College Cork  
10:15 - 10:30 Coffee break (Hall A)  
10:30 - 11:10 Wind resource, Turbulence & Wake (B 008)  
10:30 - 10:50 › Deterministic and Dynamic Coupling between Ocean Waves and the Atmospheric Boundary Layer.  
10:50 - 11:10 › Calibration and validation of Dynamic Wake Meandering model using lidar-based measurements - davide conti, Technical University of Denmark  
10:30 - 11:10 O&M (B 009)  
10:30 - 10:50 › Label Extraction, Feature Generation and Machine Learning Approaches to the Detection of Clogged Radiator Coolers on Offshore Wind Turbines - Luke Payne, Durham University  
10:50 - 11:10 › Health History Validation for Wind Turbine Maintenance - Roger Cox, Department of Engineering, Durham University  
10:30 - 11:10 Floating topics (Amphi A)  
10:30 - 10:50 › Hybrid model testing of floating wind turbines: test bench for system identification and performance assessment - Vincent Arnal, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique  
10:50 - 11:10 › A CFD Investigation of the Response of a Floating Offshore Wind Turbine During an Extreme Typhoon Event - Rachael Smith, University of Exeter  
11:10 - 12:00 Closing and feedback session (Amphi A)  
12:00 - 18:00 Floatgen visit - Depending on the weather conditions, a tour to visit the first floating wind turbine in france is proposed. This floating wnd turbine is located 15km off the Atlantic Coast, near Le Croisic on the SEM-REV Marine renewable energy test site.  
13:00 - 15:30 CSTB visit - The CSTB is a public infrastructure with very large wind tunnel facilities