EAWE PhD Seminar 2019
29-31 Oct 2019 Nantes (France)
Login
Lost password ?
Create account
Main menu
Home
New submission
Planning
HELP
@ Contact
Planning
Week
Tue. 29
Wed. 30
Thu. 31
List
‹
Wednesday, October 30, 2019
›
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
›9:00 (15min)
Welcome and coffee
› Hall A
9:00 - 9:15 (15min)
Welcome and coffee
Hall A
›9:15 (45min)
EU Funding for young researchers
CAP EUROPE
› Amphi A
9:15 - 10:00 (45min)
EU Funding for young researchers
Amphi A
CAP EUROPE
›10:00 (45min)
New concepts
› B 008
10:00 - 10:45 (45min)
New concepts
B 008
›
Effectiveness of small wind turbines in urban and suburban areas
- Larissa Zajicek, BOKU University of Natural Resources and Life Science Vienna
10:00-10:20 (20min)
›
Aerodynamics of Leading-Edge Protection Tapes for Wind Turbine Blades
- Desirae Major, Department of Aerospace Engineering, The Pennsylvania State University, State College, PA, 16801, USA
10:20-10:40 (20min)
›10:00 (45min)
Wind resource, Turbulence & Wake
› Amphi A
10:00 - 10:45 (45min)
Wind resource, Turbulence & Wake
Amphi A
›
360 CFD simulation for small wind turbines to increase annual energy production and reduce maintenance cost
- Kai Mommsen, University of applied Science Flensburg
10:00-10:20 (20min)
›
Impact of different turbulent models on floating offshore wind turbine loads and motions
- Rieska Mawarni Putri, Universitetet i Stavanger
10:20-10:40 (20min)
›10:00 (45min)
Foundation & Geotechnics
› B 009
10:00 - 10:45 (45min)
Foundation & Geotechnics
B 009
›
Strain estimation for fatigue assessment of an offshore wind turbine using regression and modal expansion algorithms
- Maximilian Henkel, Acoustics and vibration Research Group - Vrije Universiteit Brussel
10:00-10:20 (20min)
›
Natural frequencies of a monopile supported offshore wind turbine taking into account soil-foundation-structure interaction and incorporating soil spatial variability
- philip alkhoury, University of Nantes, Bd. de l'Université, 44603 Saint-Nazaire Cedex,
10:20-10:40 (20min)
›10:45 (15min)
Coffee break
› Hall A
10:45 - 11:00 (15min)
Coffee break
Hall A
›11:00 (1h)
Control
› B 008
11:00 - 12:00 (1h)
Control
B 008
›
Morphing blades for unsteady load alleviation of wind and tidal turbines
- Geethanjali Pavar, Department of Electronic and Electrical Engineering [Strathclyde], Institute for Energy Systems [Edinburgh]
11:00-11:20 (20min)
›
Design of Individual Blade Control modified to prevent enhancement of disturbances
- Abhishek Thapa, Centre for Doctoral Training in Wind and Marine Energy Systems [Strathclyde]
11:20-11:40 (20min)
›
Novel Implementations of Direct Online Rainflow-counting in Model Predictive Control for Fatigue-Reduction
- Stefan Loew, TU Munich, Siemens AG
11:40-12:00 (20min)
›11:00 (1h)
O&M
› B 009
11:00 - 12:00 (1h)
O&M
B 009
›
Training data requirements for SCADA based condition monitoring using artificial neural networks
- Simon Letzgus, Institute of Software Engineering and Theoretical Computer Science, Technical University of Berlin
11:00-11:20 (20min)
›
Monitoring system for continuous evaluation of bending moments at the tower of an onshore wind turbine: Calibration and evaluation of alternative approaches
- João Pacheco, Faculdade de Engenharia [Porto]
11:20-11:40 (20min)
›
An experimental database for wind turbine noise propagation in an outdoor inhomogenous medium
- Bill Kayser, Unité Mixte de Recherche en Acoustique Environnementale
11:40-12:00 (20min)
›11:00 (1h)
Floating topics
› Amphi A
11:00 - 12:00 (1h)
Floating topics
Amphi A
›
Numerical Wave Tank for the Investigation of Floating Wind Turbines Hydrodynamics
- Constance Clément, Complexe de recherche interprofessionnel en aérothermochimie, IFP Energies nouvelles, Rond-point de l'échangeur de Solaize, BP 3, 69360 Solaize, France
11:00-11:20 (20min)
›
Cost reduction of floating wind turbine substructure by tuned liquid damper assisted robust control
- Wei Yu, University of Stuttgart
11:20-11:40 (20min)
›
A parameter study of the metacentric height role and limitations in minimizing the trim of the DTU 10-MW wind turbine mounted on moored spar-buoy floater
- Ghaith Esber, Rostock University
11:40-12:00 (20min)
›12:00 (1h15)
Lunch
› Hall L
12:00 - 13:15 (1h15)
Lunch
Hall L
›13:15 (1h20)
Reliability
› B 009
13:15 - 14:35 (1h20)
Reliability
B 009
›
Numerical Modelling of Impact Damage in Composite Structures
- Mirac Onur Bozkurt, METU Center for Wind Energy, Middle East Technical University, Ankara
13:15-13:35 (20min)
›
A study on the progressive damage development in a wind turbine blade aeroshell during virtual full-scale structural test
- Can Muyan, METUWIND - METU Center for Wind Energy
13:35-13:55 (20min)
›
Mathematical Methods for Site Specific Remaining Life Prediction of Wind Turbines
- shadan mozafari, DTU Wind Energy
13:55-14:15 (20min)
›
On the Use of Nonlinear Normal Modes for Model Reduction
- Thomas Simpson, Institute of Structural Engineering [ETH Zürich]
14:15-14:35 (20min)
›13:15 (1h)
Control
› B 008
13:15 - 14:15 (1h)
Control
B 008
›
Improved yaw control using wind farm information
- Brian Jenkins, University of Strathclyde
13:15-13:35 (20min)
›
Independent Nacelle Control for Floating Wind Turbines
- Iain Struthers, University of Edinburgh
13:35-13:55 (20min)
›
Optimising Wind Farm Power Output to Deliver the Maximum Requested Power under Future Grid Constraints
- Jenny Morris, Department of Electronic and Electrical Engineering [University of Strathclyde]
13:55-14:15 (20min)
›13:15 (1h)
Rotor/aerodynamics
› Amphi A
13:15 - 14:15 (1h)
Rotor/aerodynamics
Amphi A
›
3D aerodynamic shape optimization of wind turbine rotors
- Antariksh Dicholkar, Danmarks Tekniske Universitet
13:15-13:35 (20min)
›
Numerical analysis of the effects of Gurney Flaps on vertical-axis wind turbines performance
- Pier Francesco Melani, University of Florence
13:35-13:55 (20min)
›
Beam models for the analysis of curved, twisted and tapered wind turbine blades undergoing large displacements
- Giovanni Migliaccio, University of Pisa
13:55-14:15 (20min)
›14:45 (1h30)
Meet the industry
› Amphi A
14:45 - 16:15 (1h30)
Meet the industry
Amphi A
›16:15 (30min)
Coffee break & networking
› Hall A
16:15 - 16:45 (30min)
Coffee break & networking
Hall A
›16:45 (45min)
Low-Order Modeling, Controller Design and Optimization of Floating Offshore Wind Turbines
Frank Lemmer, Winner of the eawe excellent young wind doctor award 2019
› Amphi A
16:45 - 17:30 (45min)
Low-Order Modeling, Controller Design and Optimization of Floating Offshore Wind Turbines
Amphi A
Frank Lemmer, Winner of the eawe excellent young wind doctor award 2019
›16:45 (45min)
Addressing turbulence in experimental wind energy research
Ingrid Neunaber
› B 009
16:45 - 17:30 (45min)
Addressing turbulence in experimental wind energy research
B 009
Ingrid Neunaber
›19:30 (2h30)
Banquet at O'Deck restaurant
19:30 - 22:00 (2h30)
Banquet at O'Deck restaurant
Session
Speech
Logistics
Break
Tour
Online user:
2
Loading...