EAWE PhD Seminar 2019 - Sciencesconf.org

›9:00 (15min)

Welcome and coffee

› Hall A

9:00 - 9:15 (15min)

Welcome and coffee

Hall A

›9:15 (1h)

Rotor/aerodynamics

› B 008

9:15 - 10:15 (1h)

Rotor/aerodynamics

B 008

› Rotor load optimization with a multi fidelity surrogate model - Kenneth Loenbaek, DTU Wind Energy/Suzlon Energy 09:15-09:35 (20min)

› Implementation of a pressure based solver in SU2 for wind energy applications - Akshay Koodly Ravishankara, Energy Research Centre of the Netherlands, University of Twente [Netherlands] 09:35-09:55 (20min)

› Recent Advances in Lattice-Boltzmann-based Large-eddy Simulations of Wind Turbines - Henrik Asmuth, Uppsala Universitet 09:55-10:15 (20min)

›9:15 (1h)

Reliability

› B 009

9:15 - 10:15 (1h)

Reliability

B 009

› Sensitivity of load application methods used for wind turbine blade design - Wilson Javier Veloz Parra, Normandie Univ, INSA Rouen Normandie, LMN, Rouen, France 09:15-09:35 (20min)

› Well-founded meta modeling of wind turbines - Franziska Müller, Institute of Structural Analysis, Leibniz Universität Hannover 09:35-09:55 (20min)

› Electromechanical interactions in wind turbines of high nominal power - Fiona Dominique Lüdecke, University of Stuttgart, Stuttgart Wind Energy (SWE), Allmandring 5b, 70569 Stuttgart 09:55-10:15 (20min)

›9:15 (1h)

Floating topics

› Amphi A

9:15 - 10:15 (1h)

Floating topics

Amphi A

› Experimental Characterisation of the Far Wake of a Floating Offshore Wind Turbine in Idealised Conditions - Benyamin Schliffke, École Centrale de Nantes (ECN) 09:15-09:35 (20min)

› Experimental testing methodologies for floating offshore wind turbines - Alessandro Fontanella, Politecnico di Milano, Department of Mechanical Engineering - Federico Taruffi, Politecnico di Milano, Department of Mechanical Engineering - Simone Di Carlo, Politecnico di Milano, Department of Mechanical Engineering 09:35-09:55 (20min)

› State of the Art of Floating Wind Energy - Aldert Otter, University College Cork 09:55-10:15 (20min)

›10:15 (15min)

Coffee break

› Hall A

10:15 - 10:30 (15min)

Coffee break

Hall A

›10:30 (40min)

Wind resource, Turbulence & Wake

› B 008

10:30 - 11:10 (40min)

Wind resource, Turbulence & Wake

B 008

› Deterministic and Dynamic Coupling between Ocean Waves and the Atmospheric Boundary Layer. - 10:30-10:50 (20min)

› Calibration and validation of Dynamic Wake Meandering model using lidar-based measurements - davide conti, Technical University of Denmark 10:50-11:10 (20min)

›10:30 (40min)

O&M

› B 009

10:30 - 11:10 (40min)

O&M

B 009

› Label Extraction, Feature Generation and Machine Learning Approaches to the Detection of Clogged Radiator Coolers on Offshore Wind Turbines - Luke Payne, Durham University 10:30-10:50 (20min)

› Health History Validation for Wind Turbine Maintenance - Roger Cox, Department of Engineering, Durham University 10:50-11:10 (20min)

›10:30 (40min)

Floating topics

› Amphi A

10:30 - 11:10 (40min)

Floating topics

Amphi A

› Hybrid model testing of floating wind turbines: test bench for system identification and performance assessment - Vincent Arnal, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique 10:30-10:50 (20min)

› A CFD Investigation of the Response of a Floating Offshore Wind Turbine During an Extreme Typhoon Event - Rachael Smith, University of Exeter 10:50-11:10 (20min)

›11:10 (50min)

Closing and feedback session

› Amphi A

11:10 - 12:00 (50min)

Closing and feedback session

Amphi A

›12:00 (6h)

Floatgen visit

12:00 - 18:00 (6h)

Floatgen visit

Depending on the weather conditions, a tour to visit the first floating wind turbine in france is proposed. This floating wnd turbine is located 15km off the Atlantic Coast, near Le Croisic on the SEM-REV Marine renewable energy test site.

›13:00 (2h30)

CSTB visit

13:00 - 15:30 (2h30)

CSTB visit

The CSTB is a public infrastructure with very large wind tunnel facilities